Features:

Hold fabric firmly

With the strong magnetic force and firm grip, these hoops keep your fabric taut. They create a beautiful, even tension on your fabric providing a perfect canvas for your embroidery. 

 

Can hold thicker fabric/garments

Hoop a huge variety of fabric and garments. These Maggie Magnetic Hoops can hold much thicker fabric than a traditional hoop.  

 

More efficient

You'll save time with the quick and easy hooping process using these magnetic frames. Secure your fabric ready for embroidering in just a few seconds!

These frames will work on the following Brother PR Series models:

• PR600
• PR600ii
• PR620
• PR650
• PR655
• PR670
• PR1000
• PR1050X
• PR1055X

Pinch Hazard

These frames use very powerful magnets and are a pinch hazard. Be careful not to get your fingers caught between the frames when hooping.

Equipment Safety

Electronics: These frames are tested to work on Brother PR Series machines, however care should be taken around other electronic devices. Strong magnets can damage sensitive electronics such as computer hard drives and may also be detrimental to credit cards etc. Avoid close contact.

 

Needle or Presser Foot Strike

To avoid a needle and presser foot strike on the frame, you MUST ensure the selected design will stitch within the available embroidery area. This is a common process required for most commercial machines. We strongly recommend using the built-in Design Trace function on your machine along with the embroidery area template provided to avoid any potential needle or foot strike. Ensure that your design does not extend beyond the inner edge of the template when placed in the hoop on top of the item to be embroidered. Remember, if you move the start point of your design after checking the position, you should recheck using the trace function. You can download this template file and easily create more templates. We have also included a cutting file for most craft cutting machines such as the Brother ScanNCut from → Maggie Magnetic Hoop template

 

Support Table Recommended

By design, magnetic frames are heavier than standard frames. We strongly recommend using a correctly fitted wide support table for flat work. This table comes standard with the Brother PR series 10-needle machines and is an optional accessory for 6 needle machines. Or, use the new optional Tubular Frame Table from Brother for tubular work. These tables prevent the Maggie Frame from being obstructed during embroidery or when tracing the design. It is very important when using the camera scan function on Brother PR series 10-needle machines.