February 2021: Library Bags
Date Posted:1 February 2021
Dymocks Children’s Charities aim to help children live healthier and happier lives by providing access to books for them to read regularly. They have been able to provide over 200,000 books to over 140,000 children in more than 630 locations around Australia, promoting a love of reading and improving literacy outcomes for these kids.
Dymocks delivers programs that target students, primary school libraries and pre-school/community centres. Most projects involve restocking school libraries where there is insufficient school funding for books, or following natural disasters in a particular area.
This month, we’re asking you to join us in creating children’s monster library bags to donate to Dymocks Children’s Charities. These bags will be distributed to children along with their new books.
LET'S GET STARTED
- Blank Canvas tote 12” x 15”
- Cream Herringbone Fabric for pocket - 1 x Fat Quarter
- Embroidery Felt Pistachio 5 ½” x 5 ½” - For monster outer eye
- Embroidery Felt White 3 ½” x 3 ½” - For monster inner eye
- Light Gold Applique Glitter sheet - Monster iris & teeth 3" x 5" rectangle
- Red Dots Hot Pink Fabric - Monster tongue 6" x 8”
- Hemingworth threads for machine embroidery applique (Dusty Green 1251, Pure White 1001, Split Pea 1061)
- Hemingworth threads for machine applique (Split Pea 1061, Christmas Red 1270)
- Rasant thread Cream 0101 - Stitching pocket and bag together
- Best Press Starch Spray
- Hot Melt Web (sewing version)
- Iron the tote bag with Best Press Starch Spray so it is wrinkle free. Fold the tote in ½ and iron ensuring the top of the tote and the handles are aligned.
- Measure 3 ½” from the top of the tote, fold and press/iron to create the placement cross hairs. Hoop the tote & stabiliser in the 4 x 4” hoop ensuring the cross hairs are centred in the middle of the hoop.
- This is a layered applique monster eye that consists of stitching all three elements, the outer eye, inner eye and iris on top of each other. Load the relevant design onto your USB and place in the machine, then stitch the layers as follows:
- Stitch the placement stitch onto the hooped bag.
- Place your Pistachio coloured felt on top of the hooped bag and tape down.
- Stitch the run stitch. It will sew around the circle two times.
- Trim the Pistachio felt back ⅛” from the stitching line, being careful not to cut the run stitches.
- The next step is a placement stitch for the white felt (inner eye). Repeat the same process to complete the inner eye and iris. Note: Please disregard the colour thread changes that will be indicated for this design on your machine. They are there to pause the stitching so you can place and trim your fabric.
- Trace the monster eyes (excluding the iris) and tongue from the PDF pattern sheet onto Hot Melt Web. Don’t forget to label the parts so they are easily identifiable. Cut out the shapes from the Hot Melt Web and iron onto the back of the Pistachio & White Felt. Cut the shapes out of the felt using scissors, set aside.
- Cut the PDF pattern shapes of the teeth and iris out. Using a sharpie, draw around the teeth & iris shape on top of the clear plastic sheet of the glitter sheet. Using scissors, cut out the drawn lines. Peel the clear plastic sheet off the glitter iris and teeth, set aside for placement later. As the applique glitter sheet is a heat transfer vinyl it is not necessary to adhere Hot Melt Web to this product.
- Iron the tote bag with Best Press so it is wrinkle free. Fold the tote in ½ and iron ensuring the top of the tote and the handles are aligned. Measure 3 ½” from the top of the tote, fold and press to create the placement cross hairs.
- Take the bag to the wool pressing mat and position and iron the pistachio felt in place. Repeat for the same process placing the white felt on top of the pistachio eye.
- At the sewing machine, select a stitch to sew around the outside of each felt eye and complete the stitching. We used the straight stitch for the Pistachio outer eye, and a small zig zag stitch for the white felt.
- Take the bag back to the wool pressing mat, and place the glitter iris at the bottom of the white felt. Using an applique pressing mat, place the iron on top of the eye and hold for 10 seconds. There is no need to move the iron. Remove the iron and applique mat and check the glitter iris has adhered. Repeat the above process to set the piece if required. Set the bag aside.
- Fold the fat quarter in ½ with WRONG sides together & iron with Best Press to remove any wrinkles. Cut the folded fat quarter to 12 ½” wide - this is the pocket.
- Fold the pocket in half with the right sides together this time and pin along the raw edges. Using a ¼” seam stitch the raw edges together, creating a “tube”. Fold the pocket tube back with the wrong sides together and press the stitched seam flat.
Applique the monster tongue and teeth on the pocket
- To find the centre of the pocket, fold the pocket in half twice (horizontal and vertical) and press or mark with a Frixion pen. Mark the centre of the Monster tongue by folding in half and press or mark with a Frixion pen (note: the Hot Melt Web paper should still be attached to the back of the fabric!) To position the Monster tongue, place the centre mark of the spotted fabric onto the centre mark of the pocket. Press in place.
- Using a straight stitch, sew around the tongue ironed onto the pocket. Finally stitch along the top of the pocket, and tongue using a straight stitch.
- Measure 1” in from each side of the tongue, and place the glitter teeth. Place an applique mat on top of the teeth and apply the iron on top of the teeth for 10 seconds. You may have to repeat this step a couple of times for the glitter sheet to adhere to the fabric.
Attaching the pocket
- Take the tote bag and fold in half right sides together ensuring the handles match at the top. Iron a fold along the bottom edge of the tote.
- Open the tote bag and lay flat. Take the previously constructed pocket and place the bottom folded edge of the pocket onto the ironed bottom edge of the tote. Pin in place.
- Using a shorter stitch length, stitch the pocket onto the tote along the bottom edge.
- Pin the sides of the pocket onto the tote bag and stitch in place using a ⅛” or ¼” seam.
- Stitch the tote side seams together using an overlocker, or sewing machine! Turn inside and your bag is complete.
How long do I have to create the project?
This sewalong will run from 1st – 28th February 2021.
Things to remember
Sewalongs are a great way to get inspired by what everyone creates, while giving to a worthy cause. If you’re new to sewing or embroidering this is a great chance to get involved and have fun no matter what the outcome. Any excuse to put your sewing and embroidery machines to good use is a great one.
Sending in your donations
The library bags can be dropped in or posted to any of the Echidna stores during the month of the sewalong. Please send any donations made after the sewalong month directly to the charity:
Dymocks Children's Charities
Level 6, 428 George St
SYDNEY NSW 2000
Free Echidna Designs
We're excited to offer our free Echidna designs available for download. These free designs are perfect for those at a beginner or an advanced level. Add these designs to your stash and create incredible embroidery!
Download free designs
Sewing, Quilting and Embroidery Machines
Interested in learning how to sew, quilt or embroider? Take a look at the innovative Brother machines available for purchase at Echidna Sewing. Wherever possible we will beat any deal and you will always receive ongoing service and support!
Find out more >
Learn to Sew or Embroider with Echidna Sewing
Come along to our fun-filled classes to learn more about sewing, embroidery and crafting. Classes cater for all skill levels, whether you're just starting out or already have advanced knowledge.
Find out more >