Picot Foot for Brother 5mm & 7mm Models
Sold Out
SKU: GEN-F039
Generic Brand to suit SA164/F039 Picot Foot 7 mm models – Creates shell-looking edges on sheer and very lightweight fabrics.
- Increase upper thread tension.
- Place the fabric with the wrong side facing up under the presser foot.
- Lower the needle into the fabric approximately 1/8" from the edge and sew 2-3 stitches.
- Raise the needle and the presser foot.
- Hold the fabric from the back and front and roll it into the curled part of the foot.
- Position the edge of the fabric behind the needle and lower the presser foot.
- Slowly sew 2-3 stitches, making sure the fabric is rolling around the curled part of the foot.
- Continue to sew to the end of the fabric.
While this product is not manufactured by Brother, it is designed to deliver the same quality and performance as a genuine Brother item.
Barcode: 785459688695
Compatible with:
Other
- 4300QDC
- 5300QDC
- A150
- A16
- A80
- BQ2500
- BQ3100
- DC1000
- DC1030
- DC2030
- DC2050
- DC2150
- DC3200
- DC6030
- DC6050
- DM7200
- DX-2000QVP
- EV1
- F410
- F420
- FD206
- FD216
- FS101
- FS110X
- FS155
- FS70
- FS80X
- HZL-DX5
- HZL-DX7
- HZL-F300
- HZL-F600
- HZL-G120
- HZL-G220
- HZL-NX7
- HZL-UX8
- Innov-is 1200
- Innov-is 1250D
- Innov-is 1500D
- Innov-is 200
- Innov-is 210
- Innov-is 400
- Innov-is 4000
- Innov-is 4000D
- Innov-is 410
- Innov-is 4500D
- Innov-is 600
- Innov-is 6000D
- Innov-is 610
- Innov-is 6700D
- Innov-is 6750D
- Innov-is 900
- M370
- M380D
- MW3018LE
- NQ3500D
- NQ3700D
- NS10
- NS15
- NS20
- NS25
- NS2750D
- NS30
- NS30LE
- NS35
- NS50
- NS55
- NV1100
- NV1300
- NV180
- NV1800Q
- NV180D
- NV2600
- NV2700
- NV50S
- NV950
- NV980D
- Practik 9
- Sewist 709
- Sewist 721
- Sewist 725S
- Sewist 740DC
- Sewist 780DC
- Skyline S3
- Skyline S5
- SL500
- Style 20
- Style 40
- TY200A
- TY400G
- TY600C
- VM5100
- VM5200
- VM6200D
- VQ2400
- VQ3000
- XJ1
- XJ2
- XP1
- XP2
- XP3
- XT37
- XV8500D
- XV8550D
Not sure if this product is right for you? Just ask us!