Contact Us

Search Results:

Generic Brand to suit SA109/F014 Binder Foot suitable for all models – Attaches bias tape with widths less than 7 mm (1/4 inch) using straight, zigzag or decorative stitches.

  1. Before attaching the presser foot, insert the bias tape into the funnel guide to match the tape edge to the guide side.
  2. Pull the tape from the rear of the presser foot.
  3. Snap on the presser foot.
  4. Adjust the needle position so that the needle lines up to the edge of the bias tape.

Hint: If the needle does not position properly on the bias tape, loosen the position knob on the foot to slide the guide to the left or right.

While this product is not manufactured by Brother, it is designed to deliver the same quality and performance as a genuine Brother item.

Barcode: 785459688602

Compatible with:

Other

Not sure if this product is right for you? Just ask us!

More From This Category

Brother Picot Foot for 5mm Models

Brother Picot Foot for 5mm Models

$19.50
Brother Free Motion Quilting (C) Foot for Selected Low Shank Machines

Brother Free Motion Quilting (C) Foot for Selected Low Shank Machines

$5.80
Spring-loaded Free Motion Quilting Foot for Brother 5mm & 7mm Models

Spring-loaded Free Motion Quilting Foot for Brother 5mm & 7mm Models

$9.95
Ruffler Foot for 7mm Computerised Models

Ruffler Foot for 7mm Computerised Models

$106.50
Brother Cording Foot for 5mm Models

Brother Cording Foot for 5mm Models

$13
Clear Open Toe Foot for Brother 5mm & 7mm Models

Clear Open Toe Foot for Brother 5mm & 7mm Models

$9.95

Your Browsing History